Ultra compact & lightweight structural design: 158x103x88mm, 400~500g depending on the sensing module selection (drone integration kits not included).
Anti EMI aluminium air-tight gas chamber with internal vibration reduction mechanism.
Active air intake with approx. 5L/min flow rate when subject to zero additional resistance.
Support 5VDC 2.5A Max (USB Type-C), or 7~32VDC 2A Max (XT30) power input.
Support ultra-low power consumption “Dormant Mode”, in which the most crucial sensing components still remain working when Sniffer4D V2 is not powered. “”Dormant Mode”” helps Sniffer4D V2 achieve negligible warm-up time after powering up. Energy storage component <1.11Wh with auto charging, charging time <60 min, lasts for >40 days per charge.
1GHz ARM CPU and 512MB RAM.
6 LEDs indicating Sniffer4D V2’s working status: sensor assembly, GNSS, SD card, LTE, drone communication, and external device.
Built-in LTE connectivity with no external antenna. Support global 4G, 3G, EDGE, and GPRS network. A micro SIM card needs to be provided by the user.
Real-time encrypted data transmission (1Hz) with data retrieval algorithm.
Encrypted data output port (USB Type-C), allowing data transmission in user-specified communication channels (e.g. a private LTE network).
Plaintext data output port (USB Type-C), enabling easy communication with other devices (e.g. a flight controller).
Built-in high-precision Global Navigation Satellite System (GNSS) with not external antenna. Supports GPS, GLONASS, Galileo, and Beidou.
Front & rear high-brightness RGB warning LEDs with solid or blinking options. The LEDs can be configured to automatically vary their color according to the gas/PM concentrations.
Swarm supported. One or multiple Sniffer4Ds can communicated with one or multiple PCs.
Fully support DJI Payload SDK (PSDK) V2 (a M300 RTK or M210 series integration kit needs to be selected, see below). The user can view Sniffer4D’s real-time data or control Sniffer4D using DJI Pilot App running on the DJI remote controller.
Support mission data backup with Sniffer4D’s built-in SD card module.
Support Over-the Air (OTA) firmware update.
